AssetSure Processing

Pruvan Work Orders: A Guide for Property Preservation Vendors

Property preservation vendor photographing a vacant home with a smartphone for a Pruvan work order

For most property preservation vendors, Pruvan is not a choice — it is the tool the work arrives in. If your clients run Property Preservation Wizard (PPW), the Pruvan-powered PPW 2 mobile app is where you will open Pruvan work orders, check in at the property, photograph the work, enter bids and completions, and mark the job ready for the office. The work itself is only half the job. The other half is proving it inside Pruvan in a way a reviewer can approve without asking a single question.

That proof is what Pruvan was built for. Pruvan, now part of Verisk, is a field documentation platform built on photo integrity: every photo taken in the app is automatically timestamped, geocoded, and certified tamper-proof, so the client knows it was taken at the subject property, at the stated time, and has not been altered since.

What Pruvan Is — and What It Is Not

Pruvan is a software company, not an inspection company and not a work order provider. It sells the documentation layer: a mobile app and an online portal that connect field crews with the office, capturing certified evidence of completed work. Its integrations cover the platforms vendors actually work in — Property Preservation Wizard (PPW), Altisource, Cyprexx, Five Brothers, Safeguard Properties, and XactPRM among them. Pruvan does not assign you work, set your price, or decide whether your order is approved — your work provider, the national or regional client, does all of that, using Pruvan as the channel. When something goes wrong with an order, the fix is usually in how you used the app, not in the app itself.

There are two Pruvan apps vendors commonly meet: the PPW 2 mobile app, where you log in with contractor credentials from your work provider and work your assigned PPW orders — this guide focuses on it — and Pruvan Direct, the standalone app for projects and photo tasks outside a PPW assignment, with before-and-after tags and short video. If you work for several clients, you may use both. The discipline is the same in either one: the photo is the deliverable, and the app’s job is to certify it.

Getting Set Up: Before Your First Pruvan Order

Setup takes minutes, but skipping it costs hours later. Do it before you are standing in a driveway with a deadline.

  • Get your credentials from your work provider. You cannot self-register for PPW work. Your provider issues your contractor login, and each provider configures what you can see and do. If a button you expect is missing, ask your provider before assuming the app is broken.
  • Install the right app. PPW 2 is available for Android and iPhone from the usual app stores. Pruvan Direct is a separate download — do not confuse the two at the property.
  • Check your photo settings. Confirm timestamp is on, resolution is adequate for a reviewer to read a tape measure or a label, and orientation is set so photos come out the way you took them. On inspection-style assignments, photos are expected in horizontal (landscape) orientation.
  • Sort out your upload settings. By default the app uploads automatically whenever you have cell service and the app is open. If you switch on “Wi-Fi only” or “Charging only,” photos wait for those conditions — fine on a city route, a trap on a rural one.
  • Charge the phone in the truck. Pruvan works hard to keep uploading, and that drains the battery fast. A vehicle charger between jobs is the difference between finishing the route and losing the last orders to a dead phone.

The Pruvan Work Order Lifecycle, Step by Step

Every Pruvan order follows the same path. Learn the sequence once and it becomes muscle memory.

1. Refresh Before You Start

Open the All Work Orders page and hit Refresh before you start the next order. This pulls in new orders and, just as importantly, updates — scope changes, cancellations, and due-date moves. Working from a stale copy is how a vendor completes work that was cancelled an hour ago. The refresh control is a small circle-with-arrow icon; on iPhone it sits at the bottom left.

2. Open the Order and Read It

Tap the order to open its Work Order Details. Read the scope, the due date, and the job notes before you drive anywhere. Check the Work Order Items if your provider added them, and note anything that needs a bid versus a completion, and anything that needs a PCR form (more on that below). If the scope is unclear, ask the office now, not from the property.

3. Check In at the Property

Check-in is the app’s proof that you were at the property at a stated time. Do it on arrival, before taking photos. Once check-in is done, you can move to the Photos section and take unflagged photos freely. Some providers require check-in on every order. Check-in also anchors the geocode on your photos — the certified location that tells the reviewer the photos belong to this address.

Property preservation vendor checking in on Pruvan at a vacant property driveway

4. Enter Bid and Completion Items First

This is the step most new vendors get backwards. Enter your Bid/Completion items before you take the photos, because the items create the flags the photos attach to. A bid or completion item says what you are bidding or completing; the flagged photo attached to it is the evidence for that specific line. Entering items first also organises your shoot: each item becomes a shot on your list, instead of a pile of unlabelled photos to sort out later. On the office side, the same items feed the invoice — which is why sloppy item entry causes billing problems downstream. For the acceptance-rate side of this, see our guide on how to improve your PPW submission acceptance rate.

5. Take the Photos — Flagged and Unflagged

The Photos section opens the camera. You can take unflagged photos — general documentation of the property — or flagged photos tied to a specific bid or completion item:

  • Flagged photos prove a specific line item. Every line you bid needs its own evidence. A general gallery does not support a specific claim — and a bid line with no photo attached is the most common and most expensive documentation failure in the business.
  • Unflagged photos cover the context: the property as found, access conditions, hazards, and anything the reviewer needs to understand the job. Take them freely; they cost seconds and save rework trips.

Photo discipline inside Pruvan follows the same rules as everywhere else in preservation: identification shot first (so the reviewer knows this is the right address), before shots from a wide angle, during shots showing the work happening, and after shots from the same position and angle as the before shots. If you are bidding a quantity, photograph the quantity — a tape measure in frame, legible, or a measuring wheel on the lot. A number in a write-up that has a photograph behind it is very hard to decline. Our winterization work order checklist shows the same before-during-after discipline applied to a specific job type.

Pruvan also supports short video — the Direct app offers a 15-second video mode — and photo notes, which let you annotate a photo at the moment you take it: a material stored on site, a label close-up, or a reason something could not be completed.

Smartphone capturing a Pruvan work order photo of a vacant property

6. Complete the PCR Form When Required

A PCR — Property Condition Report — form appears on the order when the client requires it. You only need to complete it if it is a required element of that work order, but when it is required, anything shown in red means that question or photo is mandatory. A PCR left half-finished is an order that cannot be marked ready. Fill it in at the property, while you can still see the answers — guessing from memory in the truck is how errors creep in.

7. Mark the Order Ready for Office (RFO)

When every item is done, tap Ready for Office. This is Pruvan’s submission step, and it does two things vendors need to understand:

  • It checks your requirements first. The app verifies that all the order’s requirements are met before it allows the RFO to succeed. Missing photos, an unfinished PCR, or an incomplete item will stop it — which is a feature, not a bug. Fix the gap at the property, not after you have driven away.
  • It locks the order. Once an order is Ready for Office, it is locked and no other items can be added. Do not tap RFO until you are certain the order is complete, because reopening a locked order means going through your provider.

8. Confirm the Uploads

Open the Uploads page from the home screen. Think of it as your mobile receipt: it confirms what actually reached the online portal. Uploads sit in one of three states:

  • Pending Upload — not yet upstream to the PPW website.
  • Upload Complete — safely in the portal.
  • Errored — something is wrong and the item may need a retry.

Check this page before you leave the area. A photo sitting in “Pending” on a phone with no signal is not a submitted photo, and a reviewer cannot approve what they cannot see. If an upload errors, the common causes are that the order is no longer assigned to you, the order was cancelled, or the order is locked after RFO. If the cause is not obvious, submit a Help ticket directly from the app — include your phone number and email so support can see what is happening at the app level.

Working Offline and in Rural Areas

Pruvan handles poor coverage better than most field apps. As long as you complete a successful refresh while you have a good signal, you can drive to a remote site, do the work, and the app will upload when you drive back into coverage. Three rules make this reliable: refresh before you leave coverage — no refresh, no orders; do not force-close the app mid-route, or you kill the upload queue; and check the Uploads page once you are back in signal. A thirty-second check at the end of the route is cheaper than a rejected order discovered two days later.

The 7 Mistakes That Get Pruvan Orders Rejected

  1. Working from a stale order. Skipping the refresh and completing a cancelled or changed order. Refresh every time, before every order.
  2. Photos taken outside the app. Pruvan’s value is certification: timestamped, geocoded, unaltered. Photos from your camera roll do not carry it, and an altered photo will fail to upload entirely. Take every work photo inside Pruvan.
  3. Bid lines with no flagged photo. Every line you bid needs its own photo evidence. Unflagged general photos do not cover a specific line item.
  4. No before photos, or after photos from a different angle. An after-only set proves a finished state, not that you produced it. Shoot the after from the same spot as the before.
  5. Tapping RFO before the order is truly done. RFO locks the order. A locked order with a missing item is a provider phone call and a delay — or a rejection.
  6. Leaving uploads pending. Driving away without checking the Uploads page, then discovering days later that half the set never arrived. Verify before you leave the area.
  7. Guessing the PCR from memory. Filling in a condition report away from the property. Required fields in red exist because the client needs real answers; a wrong one is worse than a late one.

Each of these is a process failure, not a skill failure. A fixed sequence — refresh, read, check in, items, photos, PCR, RFO, verify uploads — prevents all seven.

Pruvan Bids: What Reviewers Actually Check

Pruvan bids fail in predictable places. The reviewer reads a bid line, then looks for the flagged photo behind it — a line with no photo, or a photo showing a different area, waits for a revision request. Bid real dimensions, not guesses from the listing photo, and photograph the measurement in frame. If two tasks are separate line items with separate allowables, bill them separately; bundling invites a reduction. State the method and the reason for the work, and note what you could not do and why — a documented exception is manageable, an undocumented gap reads as skipped work.

Before you send a bid, run the numbers through our free property preservation job profit calculator — drive time, materials, and the paperwork time Pruvan adds to every order included.

Who Pruvan Helps — and What It Costs a Vendor

Used well, Pruvan is a vendor’s best defence. Certified photos end most “did you really do it?” disputes before they start, automatic uploads cut the end-of-day admin, and a clean RFO record builds the acceptance rate that earns more volume.

The cost is real, though. Every order carries app time: refresh, check-in, item entry, flagged photos, PCR forms, upload checks. Across a full route, that is an hour or more of office work done from the cab of a truck — and it has to be right, because a certified photo set with one wrong line is still a rejected order. That is why many vendors split the job: field crews run Pruvan in the field, and a back office handles bid entry, upload verification, invoicing, and rejection follow-up. If the Pruvan paperwork is eating your field hours, work order processing support can take it off your plate — see our services for the pay-per-task model with no contract and no monthly minimums.

FAQ

Do I have to take all my photos inside the Pruvan app?

Yes, for the photos to count as certified evidence. Pruvan photos are automatically timestamped, geocoded, and tamper-proof — that certification is the reason clients require the app. Photos from your camera roll do not carry it, and altered photos will fail to upload. Take every work photo through the app’s camera.

What is the difference between Pruvan Direct and the PPW 2 app?

Pruvan Direct is Pruvan’s standalone app for projects and photo tasks you create yourself, with before-and-after tags and short video. The PPW 2 app is the mobile front end for Property Preservation Wizard: you log in with contractor credentials from your work provider and work the PPW orders assigned to you, including bids, completions, PCR forms, and Ready for Office. Most P&P vendors live in PPW 2.

What does Ready for Office (RFO) do in Pruvan?

RFO is the submission step. The app first checks that all of the order’s requirements are met — photos, PCR forms, completed items — and only then allows the RFO to succeed. Once an order is Ready for Office it is locked, and no further items can be added. Do not tap it until the order is genuinely complete.

Why are my Pruvan photos stuck on Pending Upload?

Usually one of three things: no cell signal and the app is waiting for coverage, your settings are on Wi-Fi only or Charging only, or the order itself is the problem — no longer assigned to you, cancelled, or locked after RFO. Check the Uploads page, check your settings, and drive back into signal before assuming a failure. If it still errors, submit a Help ticket from inside the app with your phone number and email.

Can I use Pruvan without cell service?

Yes, with preparation. Refresh the All Work Orders page while you have a good signal to download the latest orders and updates, then work the remote property normally — check-in, photos, bids, and forms all work offline. The app uploads everything once you are back in coverage. Verify on the Uploads page before you call the route done.

The Bottom Line

Pruvan rewards vendors who treat it as a system, not a camera. Refresh before every order, check in on arrival, enter bid and completion items before you shoot, flag a photo to every line you bid, finish the PCR at the property, and verify uploads before you leave. That sequence is the difference between an order approved the first time and one that comes back for rework — and across a season, between a vendor who gets more volume and one who gets fewer orders.

If the Pruvan paperwork — bids, uploads, invoices, rejection follow-up — is slowing your crews down, AssetSure Processing can help. We have processed 67,200+ work orders since 2013 with 99.8% QC compliance, under-one-hour turnaround, and 24/7 coverage, across PPW, Pruvan, MCS, ServiceLink, Cyprexx, and Altisource, on a pay-per-task basis with no contract and no monthly minimums. See our pricing to check how the model fits your volume.

1 thought on “Pruvan Work Orders: A Guide for Property Preservation Vendors”

  1. Pingback: Vendor Scorecard: How P&P Vendors Get Graded

Comments are closed.

Scroll to Top